Document types

A document type is the kind of health and safety document you ask HSdocs to make, such as a risk assessment, a RAMS or a COSHH assessment. HSdocs makes 14 kinds of health and safety document, and HAVS registers for your tools. This page shows an example of each, says when you would use it, and explains how a document gets made.

How a document is written with you

For the eleven documents made through the guided conversation.

  1. Pick the document and describe the job

    Say what you are doing, where, and who else is on site. Type it, dictate it, or attach your site notes and files.

  2. Answer its questions

    HSdocs asks one thing at a time: how the work is done, the equipment, the people, what could go wrong. Answering is free.

  3. Read the draft beside the conversation

    The document appears as soon as there is enough to write it. This is when the credits are taken.

  4. Change what is different on your site

    Tell it what to change and the document updates. Up to 20 revisions are included.

  5. Download the Word file

    An editable Word file with your logo and company details, for you or your competent person to review and issue.

How a document is built from your files

For the O&M Manual, Pre-Construction Information and the Health and Safety File.

  1. Start one and say what the project is

    Give it a name and, for the two CDM documents, a few details about the project.

  2. Upload everything at once

    Manuals, surveys, certificates, drawings. HSdocs reads each file and works out what it is.

  3. Check what it found

    Each file shows what it was taken to be and where it was used. A short list says what is still missing.

  4. Preview it free, then download

    Read the whole document on screen first. Downloading the pack, with every upload as an appendix, costs 20 credits for every 10 files.

Every document is a draft for you, or your competent person, to review before you rely on it. HSdocs does not visit your site.

Written through the conversation

Jump to: Risk Assessment · Safe System of Work (Method Statement) · Combined RAMS · Combined RAMS with COSHH · COSHH Assessment · PUWER Assessment · Construction Phase Plan · Toolbox Talk · Standalone Procedure · Standalone Policy · Full H&S Policy

An example Risk Assessment written by HSdocs: Planned maintenance of a conveyor in a factory unit
Example: Planned maintenance of a conveyor in a factory unit. An invented job.

Risk Assessment

1 credit (HSdocs pricing)

Use it for: Any job where you need to show the hazards and how you control them.

5×5 matrix with hazard identification and control measures

An example Safe System of Work (Method Statement) written by HSdocs: The method for isolating and working on a conveyor
Example: The method for isolating and working on a conveyor. An invented job.

Safe System of Work (Method Statement)

1 credit (HSdocs pricing)

Use it for: The step-by-step method for a job: who does what, in what order, with which controls.

Detailed safe method statement with step-by-step procedures

An example Combined RAMS written by HSdocs: RAMS for conveyor maintenance with the line stopped
Example: RAMS for conveyor maintenance with the line stopped. An invented job.

Combined RAMS

2 credits (HSdocs pricing)

Use it for: When a client or principal contractor asks for your RAMS: the risk assessment and the method statement in one document.

Combined Risk Assessment & Method Statement in one document

An example Combined RAMS with COSHH written by HSdocs: Cutting concrete block on a housing plot, with the silica dust assessment
Example: Cutting concrete block on a housing plot, with the silica dust assessment. An invented job.

Combined RAMS with COSHH

3 credits (HSdocs pricing)

Use it for: A RAMS for a job that also uses or creates a hazardous substance, with the COSHH assessment included.

Combined Risk Assessment, Method Statement & COSHH in one document

An example COSHH Assessment written by HSdocs: Silica dust from cutting concrete block with a cut-off saw
Example: Silica dust from cutting concrete block with a cut-off saw. An invented job.

COSHH Assessment

2 credits (HSdocs pricing)

Use it for: Work with a hazardous substance, or a process that creates one, such as dust or fume.

Control of Substances Hazardous to Health assessment

An example PUWER Assessment written by HSdocs: A pillar drill in a workshop
Example: A pillar drill in a workshop. An invented job.

PUWER Assessment

2 credits (HSdocs pricing)

Use it for: Checking a machine or other work equipment against the Provision and Use of Work Equipment Regulations.

Work-equipment safety assessment against PUWER 1998 (HSE L22)

An example Construction Phase Plan written by HSdocs: A single-storey rear extension for a domestic client
Example: A single-storey rear extension for a domestic client. An invented job.

Construction Phase Plan

3 credits (HSdocs pricing)

Use it for: The plan every construction project needs under CDM 2015, written by the principal contractor or the only contractor.

The plan every construction project needs under CDM 2015, set out as HSE's L153 guidance describes

An example Toolbox Talk written by HSdocs: Lock off before maintenance
Example: Lock off before maintenance. An invented job.

Toolbox Talk

1 credit (HSdocs pricing)

Use it for: A short briefing to give your team before a task, with questions to ask and a sheet to sign.

Short safety briefing for team delivery

An example Standalone Procedure written by HSdocs: A lock-off and isolation procedure
Example: A lock-off and isolation procedure. An invented job.

Standalone Procedure

2 credits (HSdocs pricing)

Use it for: A standing procedure your people follow every time the task comes up.

Step-by-step safe working procedure

An example Standalone Policy written by HSdocs: A lone working policy
Example: A lone working policy. An invented job.

Standalone Policy

3 credits (HSdocs pricing)

Use it for: A policy on one subject, with who is responsible for what.

Subject-specific H&S policy

An example Full H&S Policy written by HSdocs: The policy for a small engineering firm
Example: The policy for a small engineering firm. An invented job.

Full H&S Policy

6 credits (HSdocs pricing)

Use it for: Your company's health and safety policy: the statement of intent, who is responsible, and the arrangements.

Comprehensive company H&S policy

Built from your own files

An example O&M Manual written by HSdocs: The heating system page of an office's manual
Example: The heating system page of an office's manual. An invented job.

O&M Manual

Free to make and preview. 20 credits for every 10 files at download (HSdocs pricing)

Use it for: Handing over a building or an installation: how to operate and maintain what was installed.

Built from the manufacturers' manuals, certificates, warranties and drawings you upload. Organised by system and asset, with every upload attached as an appendix.

An example Pre-Construction Information written by HSdocs: The site hazards drawn from an asbestos survey and a ground investigation
Example: The site hazards drawn from an asbestos survey and a ground investigation. An invented job.

Pre-Construction Information

Free to make and preview. 20 credits for every 10 files at download (HSdocs pricing)

Use it for: What a client must give designers and contractors before construction work starts (CDM 2015).

Built from what the client holds: surveys, drawings, an earlier health and safety file. Sets out the hazards reported and what is still missing.

An example Health and Safety File written by HSdocs: The residual hazards section for an office refurbishment
Example: The residual hazards section for an office refurbishment. An invented job.

Health and Safety File

Free to make and preview. 20 credits for every 10 files at download (HSdocs pricing)

Use it for: What the client must be given at the end of a project with more than one contractor (CDM 2015).

Built from what the project produced. Sets out the residual hazards, structure, services and plant under the headings HSE's guidance gives.

Registers

An example HAVS and tool noise register written by HSdocs: Six tools on a groundworks firm's register
Example: Six tools on a groundworks firm's register. An invented job.

HAVS and tool noise register

3 credits per register, once. Adding tools is free, up to 150 (HSdocs pricing)

Use it for: Managing hand-arm vibration: knowing how long each of your tools can be used in a day before the exposure action and limit values are reached.

Add a tool by make and model, or upload its data sheet, and HSdocs finds the manufacturer's declared vibration and noise figures for you to check and confirm. The register shows the time to each value, a daily calculator totals several tools, and it exports to Word with your branding. It supports your own vibration and noise risk assessments; it does not replace them.

Write your first one free

2 free credits when you sign up: one combined RAMS, or two risk assessments. What each document costs is on the pricing page.

Try free

Where the figures on this page come from

The number of document types, the credits each one costs, the free credits, the revisions included and the file and tool limits are HSdocs' own figures. They are set out in full on the pricing page and in the terms of service.

The regulations behind the documents on this page, on legislation.gov.uk: